Best Weed Eaters, String Trimmers, Weed Wackers for a Manicured Lawn

best weedeater string trimmer weed wacker

The best weed eaters, string trimmers, also called weed wackers are usually lightweight with a monofilamebest weedeater string trimmer weed wackernt string fiber that comes out of the head doing the work to cut off weeds and unwanted small plant material. They give your yard a manicured look after a smooth short mowing job. They can edge around sidewalks and they use no blades. The string will remind you of a heavy fishing line. Finally, a small piece of equipment to do almost everything—trim around tree trunks, flower beds, vegetable gardens, on the slopes of hills or banks too unsafe for a lawnmower to handle. You will no longer have a sore back as you do with hand weeding or digging with a shovel.

Monofilament Sizes

The ‘string’ is measured by diameter and each brand of weed eater uses its own size.  When you visit this site here you will see the specifications. The weed eater has a long shaft with cutting head.  The filament leaves the head and you push it to the ground to have more come out.

Types of Best Weed Eaters

There are three types of weed eaters:  with cords, without cords, and gasoline driven weed eaters.  There are those with two filaments coming out of the head and those with only one.  Decide if you want to go with gas, electric, or a battery operated weed trimmer, which is cordless.

  • Power Type—the most powerful weed eaters are gasoline driven. Electric are less powerful plus you must drag the cord around, a safety hazard.  A larger area to chop weeds would be better tackled with a gasoline unit.  For small areas with a few grassy areas, electric will work fine.  I use an electric unit for my small yard and have no problem using a 150-foot extension cord matched AWG.  I like that an electric is more lightweight with less noise.
  • Batteries and Cords—are a consideration.  You will have more power with gasoline units; cords can be a hassle, and the battery operated units must be charged after several hours used.  Be sure to check how long a battery charge will last for the specific weed eater you have your eyes on.  Sometimes people buy an extra battery, so they can get their trimming  job done at one time.  Read more about gas weed eaters here.
  • If you want a cordless unit, read more about them here.
  • Upkeep—the maintenance for electric weed wackers is much easier than gas ones. Battery operated trimmers are easy to care for too.
  • Engine Cycles—you will need to decide the tradeoffs for 2- or 4-cycle gasoline engines. You will mix the gas and oil together with a 2-cycle engine.  With the 4-cycle engine, you will not do any mixing.

Essential point—when you have a small front and back yard, or a small corner lot with 4 sides of grass, Best weedeater string trimmer weed wackeran electric weed trimmer is easy to use.  Remember, you will need an outlet to plug the extension cord into and it must be able to travel the distance unless you have multiple outlets.  Battery operated units will do this job too.

For tougher weeds, a larger area, or rural living, a gasoline engine is best bar none.  Some have two handles

Best weedeater string trimmer weed wacker

Final Thoughts

Be safe and cautious.  Always wear long pants such as denim blue jeans, tall socks, and sturdy tie shoes tbest weedeater string trimmer weed wackero keep rocks and debris from cutting you up.  At all times wear safety glasses.  Wear them over your regular glasses as well to protect your eyes and glasses.  The ones with the side shields are best.  Never go barefoot and never wear shorts.  Keep your cell phone in your pocket in case of an emergency and wear a sweatband if perspiration drips from your hair and face.  Pull long hair back.  A hat can create heat while being a safety element.  Earplugs will reduce the chances of long-term hearing loss.  Leather gloves will prevent your hands from getting blisters.

These tips are for women as well as men.  These units are not toys; keep away from pets and youngsters.  Whatever you call it, the best weed eaters, string trimmers, weed wackers for a gorgeous manicured lawn are available at Amazon.com® at affordable prices to get your lawn looking like a picture in a house beautiful ad.

 

Best Lawn Grasses for Warm- and Cool-Seasons

Best Lawn Grasses for Cool and Warm Seasons

The best lawn grasses are shown and discussed here for your successful lawn. Your front lawn is usually filled with flowers, bushes, and trees. It has lots of curb appeal and people walking and driving by love to see it all year long. Your backyard is where the kids and dog romp and play, and you have lunch on the deck cooking on the grill. Changes in the lawn’s looks and needs do happen. Or a new lawn needs to be put in if you don’t use sod for a new house build.

Best Lawn Grasses

How to Kill and Eliminate Weeds from Your Lawn

How To Kill And Eliminate Weeds From Your Lawn

How to kill weeds and put a stop to them returning with less work and less chemical weed killers is discussed here. Weeds are hardy and as my dad used to say, “A weed is a wildflower that you don’t want in your lawn.” Wildflowers are beautiful on the prairies, the woods, forests, and deserts. With healthy grass, these unwanted nuisances will stop growing.

Pros and Cons of Cordless Weed Eaters

Cordless weed eaters have become more common over the last decade because people trimming their lawns got tired of dragging a cord around.  Cords are never long enough, electrical outlets are not always outside, so they must be plugged in inside the house through a door or window that is a pain to do.  Most garages have an outlet, but you usually want to keep your door closed to keep people from seeing inside and stealing your things.

Pros

  • No distance limitation due to a cord
  • No getting caught in bushes, trees, using a cord
  • No hassle to walk around a car or bicycle as with a cord
  • Freedom of movement with no barriers to stop your motion
  • Battery operated weed eaters do not use cords and make little noise
  • No toxic fumes are emitted with battery powered weed eaters
  • Gasoline or battery powered weed eaters are stronger for cutting than electric ones

Cons

  • Gas powered weed eaters are noisy
  • Neighbors don’t want to hear the irritating noise
  • Battery operated weed eaters must have their batteries charged overnight
  • Gas powered weed eaters are heavy
  • Gas powered trimmers can have 2 to 4 gasoline engines for an even heavier weight
  • Electric weed eaters are light weight with very little noise and are lightweight
  • Gas powered weed eaters emit toxic fumes, are not environmentally friendly, and can be a hazard to your health
  • Battery operation time is short
  • Gasoline must be replaced frequently

The time has come where you’re tired of mowing way to close to flowers cutting them down, and your hands are killing you from using lawn shears.

You’ve finally decided to buy a weed eater but cannot decide on gasoline or battery powered ones.  To demystify this for you with the hundreds of types on the market, the information here should give you a good idea of where to start.  Be sure to check your budget because some can be pricey.

With the gasoline driven trimmers you will need to know if you want 2-cycle or 4-cycle engines.  It’s not as hard as you think.  You will need to know if you want a curved or straight shaft.  Will the weight of it cause neck or back problems?  You will need to hold it to decide.

Does the area around your house have lots of shade?  If it does, you will only mow and trim every few weeks during the heavy growing months.  If your space is covered with furniture, gardens, and ornaments that a lawn mower can’t get near and it gets lots of sun, then you should consider a more heavy-duty weed eater.

Which is Best for Your Needs:  Gasoline or Battery?

Gasoline—Weed eaters powered by gasoline are large and strong.  These beasts can cut heavy thick plants, such as those weeds on the edge or that keep coming up each year.  For smaller grassy type cutting, check the ones with 25 to 30 cc (cubic centimeters) displacement.

If you have a large yard, maybe a half acre or more, you will need a more robust heavy-duty 30 to 40 cc engine displacement.  A significant feature is to check for its ability at being adjustable.  This would be to take into account that it can be adjusted to be used as an edger, trimmer, or grass trimmer and some have even more functions.  These will have safety features, and the height can be adapted to different situations and your height.  You can select foam handles and check out other features for your needs.

Another convenient thing to check for is that the model of your dreams has an AFP (automatic feed spool).  Cost is going to be a factor when you want all the bells and whistles for a gasoline powered model.  They can run from $300 and up.

Battery—Weed eaters are ideal for a smaller space and what you want to do.  It will trim the edges of the lawn and chop down spindly thinner shorter weeds.  You won’t have to drag an extension cord, and you won’t have to lug around a hefty gasoline driven model.  This type of weed eater runs from $99 to $200 give or take for options you might have your eye on.

Some models use a 20-Volt lithium ion battery that will run for about an hour.  Some units use 2 batteries and they weigh about 8 pounds.

Other models use 32-Volt lithium batteries and can do trimming, mowing, and edging all in one unit.  No tools are needed to change the function usually taking a few seconds to do.  These run for a longer time with large cutting diameters.  They usually have a 90-degree tilting positon with telescopic height adjustments.

With these guidelines you should be able to buy a weed eater that you enjoy using and doesn’t break your back or bank account.

Step-by-Step Guide to Restring Weed Eaters

Weed eater trimmers have been around since 1971 invented by George Ballas, Sr., in Houston, Texas.  He got the idea by watching nylon bristle brushes spinning at automatic car washes.  He created the device to trim around his trees.

A weed eater is also known as a “string trimmer,” a “weed-whip,” a “weed-whacker,” a “whipper-snipper,” or “line trimmer.”  Whatever you call it, this device is invaluable for yard work.

Similar to fishing line, the trimmer uses a monofilament (untwisted “string” usually nylon) rather than a blade to cut grass, weeds, and other plants close to objects on flat ground, slopes, or other terrain.  It is a long shaft with the cutting head at the bottom with handles and some have shoulder straps for safe handling and added security.

Today we use them for trimming around flowers, trees, edges of flower beds and chomping down weeds.  They trim areas that are hard to reach that you don’t want to do by hand and other tools cannot handle.  Some of those areas might be fencing and fencing posts, garden boxes, and brick edging.

Weed eaters are powered by electricity, gasoline, or batteries and are a valuable tool during the summertime.  The trimmer is available in many designs and come in different sizes for what you need to do.  You will want to be careful not to get the string part into wood or trees because it will cut into it leaving indentations and harm trees.

The prices for weed eaters can run from about $40 to several hundred dollars in the USA.  This mostly depends on the amount of power you need.  Gasoline powered trimmers cost more than their electric counterparts.  Electric units are easier to use, but you must be careful dragging the cord around behind you so that it’s not tangled on things or cut.

Most of the latest models do not have to be restrung with plastic twine.  They are prewound on the spool and snapped into positon on the unit.  That saves valuable time and money.

How to Restring the Weed Eater

The best thing to do is read your User’s Manual that gives you step-by-step instructions for your particular model.  Each year a new model is available and slight variances will be made.  Be sure the thickness diameter is the same as shown on the spool or shown in the User’s Manual.  It will not take other sizes.  Wind the string neatly not crisscrossing it not too tight or too loose.  If your fingers cannot release the top cover or spool, use a small thin flathead screw driver.

How to restring a single string on an electric weed eater is best shown on this video and is easier to see it being done.

Double string weed eater video.  https://youtu.be/vOaVkvw0G80

Installing Spool with Line

Always clean dirt and debris from the hub and spool before doing maintenance or replacing the twine.  Trimmer head parts can become chipped, broken, cracked or damaged can fly out and injure your eyes, face, and other parts of your body.  Have the damages fixed before using the unit again.

  1. Always unplug the weed eater’s power cord.
  2. Press the lock tab and turn the lock ring counterclockwise.
  3. Remove the lock ring, tap button, and spool.
  4. Clean out any dirt, stone, and other fragments, including dead grass. Check it for any damage.
  5. Use a new weed eater prewound spool or rewind the old spool with 0.065 diameter, or whatever diameter your unit takes.
  6. Push through 3- to 4-inches of the line end on the spool through the line saver in the hub.
  7. Put the spool into the hub.
  8. Press the spool down and turn and lock the spool lugs under the drive gear.
  9. Reinstall the tap button and lock ring. Turn the lock ring clockwise fastening the lock tabs in all 4 catches on the hub.

Safety Using Weed Eaters

Always wear wraparound safety glasses, ear plugs, and gloves.  Wear long pants and solid shoes; if possible, wear heavy boots for foot protection.  Weed eaters have a way of throwing rocks and other hard items that can cut your feet and legs when you wear flip-flops and shorts.  Safety glasses will prevent a serious eye injury if a rock hits your eyes.  Ear plugs, yes!  Weed Eaters are loud at enough decibels (dB) to cause hearing loss.

  1. Be sure your shoes or boots have good traction. Wet grass and plant material can cause you to slip losing control of your trimmer.
  1. Protect your legs wearing long pants of heavy fabric such as denim jeans.
  1. Clothing should fit tightly.
  1. Long hair should be pulled back; long hair and loose fitting clothes can get caught in the moving parts.
  1. Protect your hands with leather gloves.
  1. Wear ear protection when using a gasoline operated trimmer.

In summary, read the User’s Manual to know how to use your weed eater.  If you unit is gasoline driven, use the right fuel mixture.  Be sure the unit is in good operating condition and that all the guards are in place.  Clear your working area of twigs, limbs, wire, stones, toys, and any trash.  Always start the engine on firm ground, not holding the weed eater in the air.  Make sure you have good footing to not lose control  Pay attention to people, vehicles, and pets nearby and always be alert to roads and what’s on them.

Stop cutting when someone or things are within 30- to 60-feet of you so they aren’t injured from flying debris.  When you aren’t cutting, turn the engine to idle.  On gas models, disconnect the spark plug wire when you make repairs.  Never refuel the device when the engine is hot; let it cool first, and have some water for yourself.

Remove grass buildup to avoid fires.  Store your weed eater so there will be no fuel spills or damage when moving it.

 

Weed Eater Lawn Mower Manuals, Care Guides, and Parts

Weed Eater Lawn Mower Manuals

The Weed Eater Lawn Mower is a lawn mower designed to trim shrubs, weeds, and grasses in hard to reach areas. It can be used also in cutting down some overgrown plants in the yard. If you have the right type of gardening and lawn tool, you will be able to trim the weed nicely and maintain the beauty of your garden.

Weed Eater Lawn Mower Manuals

Weed Eater Lawn Mower

A Weed Eater lawn mower is a weed whacker. It usually has a long streak of strings on one end and a handle on another. To cut the grass, there is a string that spins when powered on, usually by a gasoline. The basic weed eater commonly have the edger blades, air fillers, fuel filters, machine starter parts, throttle control, trimmer line, and electrical parts to function well. With proper operation, this machine makes the garden trimmed, but it takes also proper maintenance to prevent damage.

Electric-powered

An electric powered one needs a cord plugged into the socket. This limits the areas to reach. This tool is also great only for lesser weeding tasks due to its limited cord and its voltage and capacity. It is best to use an extension cord, especially if you are reaching farther into the corners of your yards. The extension cord should also be picked the right way. It should be the one designed for outdoor purposes. When operated, the tool creates small noise and it is not irritating to the ears. What is good about this tool is the low-maintenance requirement.

Battery-powered

The improvement of the battery-powered Weed Eaters is due to the modern technology. Because of the batteries, there is no need for cord and extension, thus allow you to reach far and handle it well. Air and noise pollution are also greatly reduced, only that it will require you to have extra batteries in case the batteries are drained already.

Gas/Oil-powered

The gas or oil or gas and oil powered ones tend to cause air and noise pollution, but they are the most common ones to many gardeners and lawn mowing companies. The right brand of oil and gas should also be given proper consideration as it will affect the function and performance of the tool.

Weed Eater Manuals

Weed Eater Lawn Mower Manuals, Care Guides, and Literature Parts

The manuals are always included in the package. Before using the tool, it is recommended for users and owners to always read the manuals to know the benefits, limitations, advantages, and disadvantages of the tool. It may appear as a great gardening tool, but it has its specific uses and functions, and it may not be functional for other purposes.

Proper Care Guides

Using your Weed Eater lawn mower should be done with careful procedures. This will not only prolong the life and usefulness of the tool, but will also guarantee you of a productive result.

Basically, all types of Weed Eaters functions the same. They only differ in size, power source, and ranges. One can be electric powered, battery powered, or gas/oil powered. Depending on the power source, proper care guides may differ in some ways, but they all require the same care and maintenance to prevent the tool from being damaged. Proper use of this tool, whether you are using an electric, battery, or gas/oil powered one, is very important. The way you handle and use it will matter a lot to how long the tool will last.

For the user, proper precautionary measures should also be given consideration. Protective clothing like long pants, long sleeves shirts, shoes, and goggles are helpful.

Parts

Parts and spare parts of the Weed Eaters are available from the manufacturers and sellers. Most of the package may come with extra parts, while some parts of the tool can be availed directly from the manufacturer.

Common problems arise every now and then. If the manuals do not provide the needed solution, customer service representatives may give you the answer or help you operate the tool properly. Instructions are usually given in the manual for the proper handling, operating, and maintenance. There may be instructions as well for simple repairs or quick maintenance. The Weed Eater lawn mower is a great tool for landscaping and gardening, and it is best to handle it with care so that you will be able to maximize its function and purpose for a long period of time.

How Does a Weed Trimmer Work?

How Does a Weed Trimmer Work

A weed eater is one of the common tools that gardeners use to take out all the unwanted weeds in the garden. They came in battery powered, electric and in gas-dependent tools. The generic name for it is a string trimmer while others call it “whipper-snipper,” “weed whacker”, “weed eater” and/or “strimmer”.

These tools are light-weight and they can trim all those unwanted grass by using a swiftly spinning microfilament string that becomes hard enough to cut grass and weeds. This is very convenient for homeowners compared to the old models of weed trimmers that use metal blades. In this way, owners can just replace the worn out filament compared to the frequent sharpening of the heavy blades.

One of the benefits of adding a string trimmer in the toolbox is that it can reach places that a normal lawnmower can’t.

Video – How Does a Weed Trimmer Work?

Types and Function

The first part of the weed eater is the engine, which provides the needed power for the machine to do its work. Just like any gas engines, it uses simple combustion to make it run. It is accompanied by a carburetor and an exhaust. Starting the tool won’t be a nuisance as it is very common in most gas engines, it has a pull- rope method on most weed eaters which causes the spark plug to fire and start the engine.

In addition, other types of weed eaters have an electrically powered engine. These tools are less powerful compared to gas engines models. These machines are only limited to a 2.5 diameter string due to the inefficiency to only pull 1200 watts of electricity but of course, these machines won’t sell if it doesn’t any benefit to it. The electric powered trimmers are quieter, lighter, and requires lesser maintenance compared to their gas-powered cousins.

Nowadays, there are more models of electric powered trimmers. Newer models are now cordless because of the rechargeable battery installed inside. However, these newer models tend to cost more and usually are the most expensive trimmers in the market. These wireless trimmers are much heavier than the corded counterparts and can only be used for light trimming.

Lastly, when it comes to choosing the best type of trimmer for the household, gas-powered engines tend to be more powerful and can slice off woody brushes and taller grasses. Some of the gas trimmers have a rotating function for it be used for edging. However, gas engines will still always create emissions due to the engine. For more information about the type of weed eater that best suits the household, probe the area that needs trimming and base the decision on what type of weed eater fits the area.

Gear Box

The engine connects to a spiral clutch that connects to a drive shaft that extends towards the shaft of the machine and lastly to the trimmer head. The clutch will retract its wings whenever the machine is not in use. When you start the engine and pull on the throttle, the wings extend outward and engages the drive shaft, which turn starts the trimmer head. The trimmer head can reach up to 25,000+ feet per minute which give it the power to cut through thick grass and weed.

Tips

Most gasoline powered engines have a choke or a priming mechanism to help cold start the machine. It is important to only use these according to the instructions that came with the machine to avoid damaging the carburetor when starting the tool. The diameter of a trimmer varies from the size of the tool but the most common measurement would be 0.065 to 0.090 inches, be aware of this so that the machine will operate properly.

All the information needed can be found in the user’s manual that comes with the trimmer. All the models have a guard for the user’s face to protect it from flying debris and rocks. Make it a habit of placing the guard whenever the weed trimmer is needed.

Lastly, when it comes to choosing the best type of trimmer for the household, gas-powered engines tend to be more powerful and can slice off woody brushes and taller grasses. Some of the gas trimmers have a rotating function for it be used for edging. However, gas engines will still always create emissions due to the engine. For more information about the type of weed eater that best suits the household, probe the area that needs trimming and base the decision on what type of weed eater fits the area.

Know How To Maintain The Electric Weed Eaters

The man starts a weed trimmer on a lawn
The man starts a weed trimmer on a lawn

Weed eaters are outdoor components that do a lot. They are constantly exposed to dirt, the debris that arises from all the trimming, and other potentially harmful elements. They need to be maintained. They have parts where dirt or clumps of trimmed grass can lodge into, so you have to check these areas in order to prevent any issues or deterioration when it comes to its performance.

User manuals are important

How to Maintain a Weed Eater
How to Maintain a Weed Eater

When it comes to appliances and items, you are given user manuals and guides that would inform you about the various intricacies of those objects. The weed eater is not an exception to that; it also comes with its own user manual and instructional guide. You would be informed about the necessary things to do and the things you should not do to keep the machine working optimally. You can find a section in the manual that would help you through the maintenance of the weed eater.

When you set out to use your weed eater, you should remember that the process should be safe. You don’t actually get to just hold it and brandish it around so that you’d be done with your chores. If you are unfamiliar with how a weed eater works, check the user manual. Once you get the hang of it, don’t throw the manual away as it can help you when it comes to cleaning or fixing it.

Tips on Maintaining a weed eater

  1. Inspect the entire machine before each use

If you have a personal weed eater, you should remember to check its parts. Doing so would give you knowledge on the condition of the machine. If you have a weed eater that doesn’t have a cord, then you should check if the battery is charged or if you still have enough power to go through your trimming. You could also inspect the nuts, bolts and screws if they’re secure and stable. Also check the head part for any debris that might damage the revolving capability.

  1. Let the machine warm up

After the initial inspection, you can now start the weed eater. Don’t use the component hastily; let the engine warm up for a few moments. Doing so would allow the machine to find the ideal temperature that would suit its functions. It’s just like warming up your car before driving it.

  1. Get a feel of the machine

If you have used your weed eater a lot, then you should be familiar with how it would work when it’s in its optimal level of functioning. It should have a steady sound, a controlled level of vibrations and you shouldn’t feel or hear any discrepancies. Check the controls, the shaft and the head if anything is loose or vibrating in a more erratic way.

  1. Clean the weed eater after every use

After you have taken your fill of removing the weeds from your backyard, you should let the weed eater rest. Cooling down the machine would really help extend its lifespan. You can also check for leftover debris, there’s bound to be a lot when it comes to a machine that does dirty work. If you feel the need to change a part, take the time to check the manual before doing so.

  1. Keep the weed eater well-lubricated

Machines that have revolving parts need oiling up. Don’t deprive the head and the engine of oil that would help in maintaining a slick nature. You don’t want a squeaky or a noisy machine whenever you do your yard work.

Make it a habit

Your weed eater is your investment to the cleanliness and orderliness of your yard or lawn. You definitely need to maintain it in order to keep it functioning well. Make sure that the machine is free from damage or any potential dangers. Cleaning away all the debris would also prevent it from stalling or succumbing to damaging factors. Electric weed eaters make things easier for you. You should have the time to make it as good as new at all times. You don’t want to go to a repair shop or buy a new one because your old one was given up. You’ll be thankful for your efforts to keep your cleaning apparatus clean.

Guide To Use Electric Weed Eaters

The Homemaker’s Guide in Using Electric Weed Eaters

When the summer season hits, the place where you will find most homeowners in is the garden. Sweating it out under the harsh sun, people spend most of their days fertilizing, planting and trimming their backyard to show off their property. Fortunately, technology makes things easier for everybody. While manual labor is still rampant, automatic innovations are already available to give a hand on gardening. One of the gardening tools the people are thankful for is the electric weed eater.

Is Using An Electric Weed Eater Easy Or Hard
Is Using An Electric Weed Eater Easy Or Hard

What is an Electrical Weed Eater?

A weed eater is synonymous to the term weed whacker or string trimmer. It is basically a type of hedge trimmer that keeps the backyard free of weeds. It helps trim sidewalks and yards for a better view. Weed eaters are available in varied sizes and some of them are marketed for widespread use. If you choose to buy an electrical weed eater, then you will be pleased to know that you don’t need batteries, gas or oil to make them work. While these are not exactly as powerful as gas-powered trimmers, it is lighter and quieter when in use. You might need to deal with limited maneuverability since an electric weed eater is dependent on a power outlet; however, this can be fixed easily with extension cords.

Parts of an Electric Weed Eater

The design of an electric weed eater features a cutting head, electric motor, speed switch, power switch, front handle, drive shaft and a safety shield among others.

Head- a string trimmer head is composed of a chain trimmer head, a metal brush cutting head and  a line or string head. The line head is made from monofilament lines instead of blades, yet they can cut through bushes and woody plants with ease. It is powered by electricity and held stiffly by centrifugal force.

Electric motor- This powers the head and is connected to a power outlet. Once powered, the head kicks into motion. Most electric whackers have motors at the opposite end of the head, while there are some with motors on top of the head.

Power switch- This switch is easily located at the top of the handle. Sometimes, it has reflectivity properties, so it is visible in low-light conditions.

Front handle- Controlling the direction of the electric weed whacker is done with the front handle. This is where you will be holding the machinery throughout the trimming. Sometimes, it is cushioned with foam so it won’t be uncomfortable holding it for long periods.

Speed switch- This switch is rather optional among electric models. This allows you to control the speed of your trimmer, depending on what you are trimming.

Drive Shaft- This extendable part of the machine allows a safe distance between the user and the motorized head. The most common material used for the shaft is solid steel, which is lightweight, durable and rust-resistant.

Safety shield- An important part of the machine’s anatomy is the safety shield. It keeps stones and other debris from rocketing out of the head whenever they are sucked inside.

Using an Electric Weed Eater

Knowing the important parts of an electric weed trimmer is crucial to maximize its use. Once you are ready to trim, make sure to plug the string trimmer securely. It would be a hassle if the power cord comes undone every few minutes. The weed whacker should be held close to the ground for a neat trim. If you are quite taller or shorter than average, adjust the front handle to find a comfortable position. A steady side-to-side motion is recommended to level the weeds. However, don’t pursue any direction. Continue forward while doing it.

Remember to do the trimming in a stone-free area, since hard debris can wear out the nylon cutting thread. If you notice that some weeds are not cut even after you walked over them, consider pulling the thread out for about six inches. Do not trim to the ground since you will be wasting your nylon thread and making a big, dirty mess in the yard. Make sure to stop and rest for a few minutes if you feel a strain on your arms and shoulders. Practice always makes perfect, so don’t overdo things on your first attempt. Be sure to read the instructions as well, since these sometimes provide tips on how to make the most out of your electric weed eater.

Figure Out Which Weed Eater Would Be The Right Choice For You

Weeds are certainly the biggest problem in the backyard. It is important to remove weeds from the backyard as soon as possible because if ignored then your backyard will have more weeds than grass. To control the weeds and to remove them from every corner, weed eaters are the best tools. A good quality weed eater is one thing that you need and the other thing is that you must know how to use the weed eater to remove weeds efficiently. Therefore the person must learn to use a weed eater either from manual or from an experienced weed eater user before trying using it himself.

Buying Right Weed Eater

Because of the various weed eaters available in the market, buying the right weed eater has become very difficult. Along with wastage of money and your time, wrong purchase can give you a headache in place of relief from weeds. To pick the one which is right for you form the variety of weed trimmers is not an easy job therefore we are here to help you to decide the right weed eater for your requirement. When a person buys a right weed eater, it is for sure that it will last longer with proper maintenance.

Figure Out Which Weed Eater Would Be The Right Choice For You

Figure Out Which Weed Eater Would Be The Right Choice For You

Types Of Weed Eater

There are basically three types of weed trimmers and below we have given a brief description about all three of them to make your job easy.

  1. Curved shaft weed eater

Curved shaft weed eaters are very easy to use and are ideal for removing weeds from small lawns, under the trees, around the fences and near plants. They are designed in such form that make sit flexible to reach such places and work efficiently but do not have power to perform for longer. One disadvantage of curved weed eater is that their drive cable can easily.

  1. Straight shaft weed eater

Straight weed eaters are work perfecting in small backyards, under the trees and even remove weeds from hard to reach places. They are light in weight and easy to use. They can reach at difficult places as well and can remove weed perfectly from anywhere. All you need to do is just to push the start button and it was start working effortlessly. They are environment friendly and do not produce harmful gases. They are manufactured in such way that it can handle the powerful motor and can remove weeds in no time.

  1. Rolling weed eater

Rolling weed eaters have arrived in market long back but still they are considered as one of the best weed eaters available in the market. They have the most powerful motors and cut very fast ad efficiently because they have the strongest trimmer heads. The speed on the rolling weed eater is of the top notch that it clears almost every weed that comes in its way. Rolling weed eaters have different weed line with different qualities therefore asking about the weed line while purchasing rolling weed eater is one important thing.

Conclusion

Above we have mentioned all about the curved shaft weed eater, straight shaft weed eater and rolling weed eater that the buyer must know. Using weed eater is equally important as choosing the right weed eater. When buying a weed eater, make sure that the parts of weed eaters are available in the market or not. A good maintenance is the key to keep your weed eater in good condition always. Cleaning it after every use and taking good care of will surely make your weed eater work efficiently. A right choice and proper maintenance, both are good for your backyard as well as for your pocket.