Do you want to know when you should respool a weed Eater?

A weed eater is a handy tool for a homeowner. It is useful in trimming weeds and grass in tight spaces or around obstacles which incapacitates a lawnmower. Despite all the differences regarding designs and modes of powering, the working principles of a lawn mower and a weed eater remain the same. 

Every weed eater uses a fast spinning string of plastic string to whack grass around your lawn. The trimming line is withdrawn from a spool, mostly by bumping the trimmer head on the ground. After a while, the spool runs out and you have to respool the weed eater.  But do you know exactly when you should respool a weed eater?

The task of respooling can also be done for a variant of reasons and not necessarily when the spool is empty. Sadly, it is one that not many people do not love doing or wait too long before undertaking. Knowing when to respool a weed eater is essential in retaining its effectiveness.

do you want to know when you should respool a weed eater

When Should You Respool Your Weed Eater?

Frankly speaking, there are a number of reasons why you need to respool your weed eater. The first and main reason is usually when the line has run out. When you have been whacking the weeds in your backyard for some time then no line advances, this may mean that the line could have run out.

Your weed whacker trimming line, usually made of some kind of plastic, wears down as you use it. The resulting repeated high-speed contact with weed, pavements, fence posts, trees, grass, and stones renders the working line section ineffective after a while. 

At that point, you then have to advance a newer portion of the line by bumping the weed eater head on the ground by relying on the automatic option. 

It does not matter whether you are using either an automatic or bump feed string line. Another way of telling that the line is at its end is to check for a change in trimming quality. If it deteriorates, then it means only a small portion of the line remains in the spool.

In other instances, it could be as a result of problems with the line itself. If the spooling were done poorly in the first place, then it wouldn’t trim as you would want. Twists in the line would necessitate a change of spool for a better one. 

There is no set time or moment when you should respool a weed eater. If you suspect any issues with your line, then you need to stop working and check it out. It could even be a case of a line that keeps on getting stuck. In case you are out of line, or the current line is ineffective, then it’s time to replace the spool. 

How to Respool Your Weed Eater

After you have established that you indeed need a new line, it is time for you to install a new spool into the trimmer head. With this little help from me, you can actually do it yourself and stop relying on help. 

The process is a standard one, whether you have a battery powered, electric or a gas powered trimmer. Respooling the weed eater can be done in two ways. First, you can re-string the line onto the spool yourself, often from a bulk of line. Secondly, you can also buy an already would spool and insert it into the spool slot. The latter saves you time but will cost you more. 

What you need

  • Bulk trimmer string line
  • A pair of scissors
  • Measuring tape
  • Washcloth
  • Pre-wound spool (this is optional)

1. Buy the right string size

If you check the manual your string trimmer came with, you will notice a specification on the thickness of string it should use. The diameter is usually dependent on the type of power. More powerful gas trimmers take the thicker strings, with diameters ranging from 0.80” to 0.11”.

The less powerful battery powered and electric trimmers use the thinner 0.065 strings. A thicker string than the recommended will not fit through the hole. Conversely, a thin string underutilizes a trimmer meant for thick strings. 

2. Disconnect the source of power

Safety procedures require that your trimmer has to be switched off before you can start using it. For electric and battery powered tools, unplug or remove its battery before you can disassemble its trimmer head. The last thing you want is to have the tool switching on while in use. 

Also, ensure the trimmer cools down completely before attempting any works on it. A hot gearbox and trimmer head could cause you burns. 

3. Disassemble the Trimmer Head

Have the trimmer lay flat on a workbench or work table. Others find it easier to hold it upside down so that you can easily access the trimmer head. Once in a position you are comfortable with, remove the trimmer head’s retainer cap. 

This process involves unscrewing the cap, pressing on a tab then turning the cap in an anticlockwise direction, or a method specified by the manufacturer. All in all, it should be an intuitive process of turning the head in the indicated direction, then pulling outwards. 

4. Clean the Housing of the Spool

Once you have opened the trimmer head, pull out any remaining string line inside. Then use the washcloth to tidy up the housing of the spool. Repeated use creates a buildup of stones and grass inside the housing that reduces the ease of unwinding of the spool. 

5. Measure Out the Required Length of Spool

If you check either on the manual or the spool housing, you will notice a specification on the length of trimming string the spool can accommodate. Use the measuring tape to determine the exact length as you draw out the bulk length of the string. 

For spools that accommodate 30 feet of string, measure this and then cut off the line. Allow for allowances of a couple of inches. This step is only required if you intend to re-string the spool yourself. Otherwise, you would have just inserted the pre-strung pool right back in and covered the head.

6. Wind The String onto The Spool

Note that if your weed eater uses two strings, then you have to measure the two specified string lengths. Once you have the length you need, locate a center hole on the housing, then push through about ½ inch of line. This length holds the string in place as you wind it. 

For a two-stringed weed eater, each housing section has its center hole, with a divider in between. Work with one section then go to the next. Check the indicated direction of wrapping, and then wind the line side by side, layer by layer. Do the same to the other side. 

7. Clip The Ends into The Notches

Do not wind the whole length of the string. Leave about 5-6 inches unwound. On the edge of the spool(s) is a notch. Clip the protruding end into this notch (will be two in a double stringed trimmer). These notches aid in keeping the line in place as you put back the spool. 

8. Return the Spool Housing

Assemble back the spool housing into the trimmer head hub. Release the string end you had clipped in the spool notch. Pass the end through the line exit hole (eyelets) located on the weed eater head. This step should be repeated for the second spool whenever applicable. 

9. Re-Attach the Trimmer Retainer Cap

After replacing the spool into the weed whacker head, align the spool retainer with the eyelet slot. Try to pull the string through to see it unwind smoothly. If it does, screw back or snap the retainer ring into place. 

Try to wiggle the ring a little for a tight fit. It might fly as soon as you start the trimmer off if it is left loose. Put back everything together, then power back your tool and continue with your work.

Tips to Ensure You Don’t Respool Too Often

The frequency with which you respool a weed eater depends to a great extent on how you use it. The more torture you subject your line to then the time duration when you should respool a weed eater becomes shorter. 

  • Use a trimmer line guard to protect it from hitting other objects such as fence posts, lawn furniture or house sidings. These objects wear out a trimming at a faster rate. Otherwise, the line might damage the likes of house sidings.
  • For a dense weed growth, start the trimming process at the top of the weeds, working your way downwards. Starting down subjects the string to excessive strain.

do you want to know when you should respool a weedeater

  • Avoid thick patches of twigs, vines or grass.
  • Only use the string trimmer when the grass is slightly dry, but not too wet. Wet grass is heavy, and quickly wears your strings. 
  • Use personal protective equipment when using the string trimmer. It doesn’t prolong the lifespan of the string, but it keeps you from harm’s way.


There is no specific time when you should respool a weed eater. It all depends on several factors such as the intensity of the weed growth, the line thickness and how many hard surfaces it comes into contact with. The respooling process is easy too that you can comfortably do yourself in just a couple of minutes. 

How do you Take Care of Your Lawn When You Are on a Vacation?

How do you take care of your lawn when you are on a vacation

Everyone deserves a refreshing rest after a series of hectic months at work. Summer then becomes the perfect time for you and your family to have a good time before the kids return to school. July and August is that time of the year to put most of the things on hold.

As you head off to your well-deserved summer vacation, whether for days, weeks or months, you still have concerns about your beloved lawn. When you’re gone, the lawn still grows and this means it has to be attended to.

However, finding a willing neighbor or relative to help you out might be unattainable at times. There are still ways in which you can keep the lawn watered, nourished, and well-kept even in your absence.

These tips on how to take care of your lawn when you are on vacation will help ensure that you come back to your usual lavish lawn. 

What is the Safest Way to Use a Weedeater?

What is the safest way to use a weedeater

Initially, you need to be familiarized what weedeater machines are.   Weedeaters are portable lawn care power tools also known as string trimmers, weed wackers or simply whackers. These equipment devices are used in trimming and edging your lawn and other similar land structure with a grassy condition. They do not use blades to cut grass but use flexible monofilament line similar to a fishing line only thicker.

The following topics will guide you on how to be safe starting with your PPE or Personal Protective Equipment. Next to it is the step by step safety guidelines alongside with the weedeater’s uses and functions.

Start with Your Personal Protective Equipment

Eye Protection

Wear safety glasses that are certified to withstand shattering in severe cases and will surely protect your eyes from debris everywhere. There are also safety glasses with side shields designed to be worn over your prescription glasses. Make sure to replace safety glasses when they become filled with scratches or become brittle.

Face Shields

Face shields are recommended if the grass area is heavy and flying debris is expected probably due to wind or effect from trimming on open areas. Safety glasses sometimes become insufficient and a backup cover is needed. 

Dust Masks

Wear high-quality dust masks suitable to the task you are about to perform and when exposed to concentrations of dust and/or airborne debris. Do not wear the mask when it is already worn out or damaged as it will compromise its ultimate purpose in deterring the dust particles and other elements.

Hearing Protection

Depending on the type of machine you are going to use, always make sure your ears are also protected. Extended exposure to noise can result in hearing problems. Use earplugs or earmuffs in these work environments.

Hand Protection

Use work gloves with the proper thickness or rubberized linings appropriate to the machine being used and based on your hand’s sensitivity.

Work Shoes

Tough and closed shoes are required. You might be working on areas that have potential hazards, especially when you are moving the objects away from your work areas. Work shoes appropriate for the type of work being done are needed. Open-toed shoes or sandals are not safe to use. You might need to wear boots or long socks to cover your entire feet and legs from crawling insects in the area of work.

Hard Hats

Hardhats are needed and ideal for every construction type of work. Grass trimming may include moving large objects and you need to have a projection from possible head injury or falling objects & debris. You may also include an absorbent fabric head band to keep the perspiration from running over your face.

Safety Vests

Safety vests will make sure that people can notice you while you are using tools that may cause hazards to them, especially if there are several individuals working with you. Wear safety vests or high-visibility clothing in your work area.

Step by Step Safety Procedure

  • Gear up and wear all necessary Personal Protective Equipment (PPE). Tie up if you have long hair or use a hat and hairnet and make sure to keep it away from the engine or motor of the weedeater.
  • It is safer to let the grass and weeds dry out before trimming. Grasses are lighter when they are dry.
  • Hold the trimmer right and tight with both hands. Make sure it is on the right side of your body so that the muffler and smoke is away from your face. Keep your left arm straight and allow your right arm slightly bent and flexible.
  • Stand upright and place the trimmer at the same level of your waist. Start and move slowly, initially to feel the force of the machine while keeping your position steady and firm. Do the cutting from right to left while keeping the debris away from you.
  • Continue cutting from top to bottom especially if the grasses are long and thick. The motor will not be stressed out and so as your arms and legs.
  • Slowly tap your trimmer’s bump knob to the level ground to release more line to avoid engine stalling. Allow the tip of the line do the trimming and not the middle part. It is most effective using the line tip. When the string breaks down or gets damaged, just run the machine at a high speed and slowly bump its knob to the ground to release an extra trimming line.
  • The trimmer line might get damaged if it hits anything hard like walls and metal objects. So make sure to hit the grass and weeds only. If it hits hard objects, stop the machine and double check your line trimmer for potential problems.
  • Cutting around the trees, fences and posts are more challenging since you do not want to damage any of these including you trimmer. So rotate your trimmer to a 90-degree angle from the ground to make a more precise trimming. Do not use string trimmers to cut grass against the trunk of trees. Doing so might kill the tree if the monofilament line cuts the bark of the tree.

Safely Conclude Your Task

Before you head on and begin with your trimming task, applying precautionary measures is a must. It may seem like a common backyard or outdoor chore on a daily basis, but using a weedeater to edge your lawn and cut the growing turfs down still require an utmost preparation to prevent any accidents and any damages to your equipment.

To sum it all up, here are the important reminders you should take note of:

  • Regularly inspect your PPE (Personal Protective Equipment) for optimum safety conditions to make sure you are getting the right benefits from those shields.
  • Safely disengaged your weedeater or trimmer and carefully place it away from individuals especially children that might bump onto them and cause accidents or even damage to the equipment.
  • Always leave your workplace clean and neat and free from potential hazards to passersby and co-workers.

There is nothing can compare to having the job done completely and safely if you follow the steps and precautions discussed herein.

How to Prepare and Clean a Weed Eater

Keeping your weed eater clean and thoroughly prepared prior to any trimming and edging work enables you to operate the machine without any irregularities. Although these trimming machines can break down or wear out eventually, keeping your weed eater well-maintained can deter damages, function lapses, and abrasion. Long-lasting performance can also be guaranteed.

As the regular cleaning and proper preparation maximize the function, you can get all the trimming and edging work in no time. However, keeping up with a maintenance might not come easy as a breeze. It is true that precautionary measures are significant and should be carefully applied. But if you are still figuring out how to clean and prepare your trimming equipment, we have rounded up the easy ways to do it.

The Importance of Preparing and Regular Cleaning

How to Prepare and Clean a Weed Eater

As we are often occupied by busy schedules, countless errands, and piles of chores at home, investing a time to clean and prepare the weed eaters or any gardening equipment might feel like a waste of time. The trimming job itself already consumes a lot of time and taking an additional task, such as prepping and cleaning, might just demand more. However, the results would actually imply quite the opposite.

Initially, the preparation and cleaning process will take some time. It takes an hour, a few minutes, and sometimes, even longer than that. But getting this task carefully done will provide long-lasting and efficient results that will make the trimming job much easier, faster, and better.

Truly, cleaning and preparing save time and effort. As it sustains the quality and powers up every part to function correctly, it is less likely to break down, malfunction, or get all jammed in the middle of your trimming work. Trimming, cutting, edging, and whatever needs to be done can go smoothly. You can wrap everything up in no time!

It also delivers merits financially. Getting it in top shape will not drive you to visit repair shops more often. If you start maintaining your weed eater today, there is no doubt you will save a lot of your expenses in the long run.

How to Prepare and Clean Your Weed Eater

How to Prepare and Clean a Weed Eater

Whether you are using a gas-powered, battery-powered, or an electric weed eater to trim your lawn, there are specific guidelines you have to follow when cleaning and preparing them right before and after the trimming work. It is not right to just let these machines run across the fields and munch the vast turf all the way down and toss them back to the garage when you are done.

If you haven’t done any proper cleaning and preparing yet, you can start off with the basics to keep your weed eaters in their best condition. Manufacturers provide instructions in the manual for the basic maintenance and the schedule for cleaning. However, it is always nice to have yourself backed up with a comprehensive and informative guide. Take a look at the following procedure:

Electric and Battery-powered Weed Eater

  1. If you’re using an electric weed eater, make sure to turn the switch off and unplug it from the power source before cleaning. For battery-powered weed eaters, remove the battery first.
  2. Take a stiff brush and use it to brush the dirt off, the weeds, and all the other fragments that might clog or damage the strings. Go over the strings and move it back and forth to thoroughly clean the strings and eliminate everything that needs to be removed.
  3. Prepare a small bucket of warm water with soap. This will be your cleaning booster where you can dip your brush in. It is optional, though. But if there are pieces, debris, dirt, and other stubborn areas that need a thorough cleaning, this will do. Use it together with your brush and scrub it all over the deck sides and the handle.
  4. Do not leave the parts wet. Make sure to keep them dry. Otherwise, leaving them damp or wet will cause damages that will result in malfunctions and abrasion.
  5. When it comes to the air filter, it is recommended to detach it from trimmer every after 10 hours of use. Wash all the dirt off with warm water with soap and dry it afterward. When it is completely dry, top it off with subtle layers of motor oil and press it down or squeeze it firmly to remove the excess oil. Once this process is done, you can attach the air filter back to the trimmer.
  6. The spark arrester also requires thorough cleaning. This is the part of the weed eater that plays a critical role to keep the machine running. Without regular maintenance, the weed eater won’t function well and might get jammed while in use. To clean this up, access the muffler and take the spark arrestor out carefully. A carbon cleaner and a wire brush will do. Use these to remove all the dirt. After cleaning, place the part back to the machine.
  7. The spark plug should also be cleaned intricately with a brake cleaner. Without proper cleaning and preparation of these spark plugs, your weed eater might not power up. Once you have finished the cleaning, attach it carefully to the unit. However, if it looks worn out, especially the tip and it is black, don’t use it anymore. Consider replacing it with a new one.
  8. After cleaning, check if the parts are all placed correctly and tightly. Check for debris, fragments of weeds or dirt that might get stuck along the process of trimming. Make sure they are removed. After an exhaustive inspection, plug it in or put the battery back in the unit. Power it up and test the weed eater.

Gas-powered Weed Eater

The maintenance for gas-powered weed eaters is almost the same as the procedure for electric and battery-powered weed eaters. The spark plugs and air filters should also be provided with an in-depth cleaning procedure and preparation. As previously mentioned, air filters need to be removed every after 10 hours and cleaned with a soapy water. Spark plugs, on the other hand, should also be checked for possible wear outs and spruced up with a brake cleaner.

As this is a gas-powered trimmer, it fully operates through the mixture of oil and gas. Manufacturers provide the optimal measurement regarding this. Here are some reminders to take note of:

  1. Make sure to check the manual for the correct ratio for the oil and gas. Similar to the maintenance of a car, a gas weed trimmer requires a regular oil change.
  2.  Drain the old fuel out if you are not going to use the trimmer for more than a month. Leaving an old fuel in the tank for so long can cause severe damages to your weed eater.
  3. If your equipment does not seem to be properly working, you may also need to check the strings. Every unit requires specific string diameters. It is, then, significant to determine what diameter your trimmer uses and make sure to get the compatible string. Otherwise, it won’t work.

When Your Weed Eater Stops Working

There are instances when the weed eater will stop working. If ever it does, you can try to apply the procedure for maintenance as previously mentioned. But despite the rigorous cleaning and preparation, you may need to inspect the unit again for possible damages that require repairs or part replacements. Every unit comes with a warranty that you can fall back into when such issues arise.

However, when you’re using an old equipment and has exceeded the warranty schedule, the repair shop is your last resort unless you know how to fix it up. If you are not quite knowledgeable, it is best to leave it to the professionals. But without the warranty, repairs and replacements would sometimes cost a lot. If your unit seems to be completely worn out, don’t settle for expensive repairs if you can just invest in a brand new weed eater.


Intensive and regular maintenance is a must to keep your weed eaters working and in the best condition. It saves time, effort, and money. Although repairs and replacements should be done from time to time, regular cleaning and proper preparation prevents serious damages and can save you a lot in the long run.

Should You Establish a Lawn Care Business? Here’s All You Need to Know

Should You Establish A Lawn Care Business

Putting up a business is a tough field to go through. There are a lot of factors to consider before you settle down in a business venture that would bring in a reasonable financial gain. You have to make investments in equipment and other materials you need to start out a business before getting all the profit back to your savings. Although there are no certain outputs, sometimes you need to take a risky step to know how it will turn out.

If you are planning to establish a lawn care business, will it be worth to try? It is probably hard to tell but you won’t know unless you do it. It takes a lot of careful planning and saving before you get to the peak of success. Proper evaluation of your financial ability, the equipment to use, the market you should capture, and an effective advertisement is highly imperative.

When Will You Need a New Weed Eater?

When you have a yard, it is necessary to provide regular maintenance. You need to cut those weeds off and make a few trims on the grass to keep your yard clean and healthy. Gardeners and homeowners may find this task a little difficult without the right gardening equipment. But since weed eaters have become widely available in the market, yard maintenance won’t be much of a problem anymore.

Although a weed eater can get the job done in your yard or garden, the equipment itself also requires regular maintenance. Unfortunately, many owners don’t have enough time to do this. That’s why the equipment just wears out until it’s no longer useful.

Should you get a new equipment right away, then? How will you know when to get a new weed eater?

Why You Need a Weed Eater

Before you decide whether to get a new weed eater or not, you’ve got to know first why you need to use this equipment for your yard, lawn, or garden. It will help you understand the importance of using a weed eater in its utmost condition.

Weed eaters are available in different types. You can choose among electric, battery-powered, and gas-powered weed eaters. Although they vary in some ways, like the noise, power output, engine performance, and the range or distance they can cover, they all function to keep your yard, lawn, or garden neatly trimmed.

If your equipment is properly maintained or in its best condition, you surely will benefit from these positive results:

  • It is much easier to clean and trim all the weeds in your lawn, garden, or yard. It does all the trimming job for you and gets it done in no time.
  • You don’t need to be a professional to do the trimming. Weed eaters allow you to cut those weeds and grass off according to the length you prefer.
  • It comes with a long handle that allows you to do the maintenance without straining your arms and back.
  • This gardening equipment enables you to work faster thus gives you more time for your other duties and household chores.
  • You can maintain a healthy, green, and clean environment for your family.

When will you need a new weedeater

Signs You Need a New Weed Eater

When your weed eater gets damaged and seems malfunctioning, it will give you more headache than getting the gardening task done. It might also take so much of your time before you finish all the trimming you need.

Some owners, however, still want to stick with their equipment, provide some repairs, and use it as long as it is working. If you feel the same way or seem uncertain whether to get a new weed eater for your gardening duties, you must determine the damages that might affect your equipment’s performance. You may also consider some factors.

When will you need a new weed eater? Take a look at these signs.

1. When the weed eater is not starting.

There are a lot of possible causes why the weed eater is not starting. It can be due to a blocked fuel filter, dirty air filter, or it has just totally worn out. If you are using an electric weed eater, make sure that it is plugged into an electric outlet. But if it’s plugged and still does not power up, there might be a problem with the cord or the spark plug.

Gas-powered weed eaters, on the other hand, require fuel in the tank. If there isn’t enough fuel, it may not really start. The same thing goes with battery-operated weed eaters. They may be convenient to use as they are cordless, but replacement of batteries from time to time is necessary.

Considering all these situations, it can actually be resolved with quick and easy ways. However, if your weed eater is not starting despite having it plugged, fueled, or powered up with batteries, there must be a more serious damage in its engine. This needs to be checked. If repairs are not possible, you need to replace your weed eater with a new one.

2. When it is not cutting the grass.

The ultimate solution you’d probably think of is to restring the weed eater or buy a replacement for the string cartridge. If you know how to do it yourself, it might not cost as much as when you have it repaired. But if not, then you might need to spend a little to change the string.

The common reason why the weed eater is not doing its trimming job is when the string comes out. Then, as what was mentioned, you have to restring the weed eater. But if you’ve done this step and the weed eater is still not cutting the grass, it might require some repairs which may cost a lot.

3. When you see obvious damages on the equipment.

When most of its parts are damaged and broken, it may be working but it may not be safe to use. Eventually, it will break and won’t be working anymore. If that happens, you should consider getting a new weed eater.

4. When it is totally worn out.

When it looks like a total trash, malfunctioning, damaged and broken, then you have to give it up! There are weed eater brands that are durable and reliable for a long time. But due to certain conditions, improper use, lack of maintenance, and extensive use, a weed eater can wear out eventually. And sometimes, all you have to do is keep it in the garage or throw it away!

5. When you have acquired a bigger lawn or yard.

Bigger and wider space requires additional gardening equipment. And if you’ve expanded your territory or acquired a bigger lawn, yard, or garden, a new weed eater might come in handy. An additional equipment might cost you some bucks but it can be very useful in the long run.

When will you need a new weed eater


A lot of users consider extensive repairs and replacement of the parts to keep their weed eater in the best condition. Although this might be a good option, it would be better to think carefully if it is really worth the money. Many have been skeptical whether to get a new weed eater or not because of the price tag. But some repairs and replacements cost as much as the brand new weed eater.

So, if you’re looking for a high-quality weed eater with superior performance, why don’t you consider getting a new one? And if you’ve noticed any of the signs mentioned, then it’s probably time to give up your old equipment.

Is It Dangerous When You Use a Weed Eater near the Fence or Building?

Fenced houses, buildings, and establishments with a lawn or yard require some trimming every now and then. Lawn mowers are an efficient equipment to keep those green fields neat and clean. But if you want to get into the corners of the fences and around the buildings and posts, a lawn mower might be too bulky and big. Hence, a weed eater is what you need.

A weed eater is an innovative gardening equipment that provides precise trimming and edging. It helps maintain your lawn and keep it in a much neater and cleaner condition. However, since this is the most appropriate equipment to reach the spaces and corners along the fences, buildings, and other establishments, some users expressed their concerns whether it is dangerous or not to get too close to those areas.

Can a weed eater damage your fence or the areas near the building? Is it really dangerous? How can you use a weed eater safely?

Is it Really Dangerous?

Is it dangerous when use the weedeater near the fence or building

Just like any other gardening equipment, improper use can cause damage to your lawn and fences. So, if you use the weed eater the wrong way, it might not really be safe to use. Although this can be a factor, the fences, the bottom part of the building or the post itself can also be vulnerable to damages if they are not regularly maintained. There are some effective procedures that you can try to protect and fortify your fences and the areas around your establishment.

Metal posts and flashing are some of the recommended materials that you can use to reinforce your fences in the yard. Keeping them regularly maintained and durable will allow you to use the weed eater more efficiently. Although a weed eater is lightweight and ergonomically engineered with slimmer parts to reach the innermost areas, you still have got to be extra careful when using it.

When it comes to trimming the lawn near the building, it won’t be a problem if you prefer using a weed eater. You can trim the weeds in the areas near the building but do not try to get too close to the building or establishment. The utmost concern isn’t the damages that you can cause to the building, but rather the damages your weed eater could get.

Unlike fences, buildings are concrete would not likely easily get damaged by a weed eater. Some scratches might be visible or the paint might flake overtime if you often trim the weeds too close to the building.

Then so, is it dangerous to use a weed eater near the building or fence? No, it won’t be if you apply the proper precaution and handling. If you trim within these areas and not get too close to the fence or building, using a weed eater won’t be a problem. But if you handle and use it improperly, it can really be dangerous.

How to Safely Use a Weed Eater

Is it dangerous when you use the weedeater near the fence or building

Whatever type of weed eater you use, perhaps a gas-powered weed eater, cordless or battery-powered, and electric, there are safety protocols you have to follow to prevent damages on the establishments, fences, and to your equipment as well.

Here are some tips you can keep in mind before and while using a weed eater.

  • Always wear safety goggles before using this gardening equipment.
  • Use ear muffs or earplugs for ear protection, especially when you are using a gas-powered weed eater. This type is really loud and can definitely sound unpleasant to your ears.
  • Always check the strings. Make sure that you don’t have more string than you need. Do not let the strings go out hanging on both sides of the head. If you have longer than you need, it can cause your engine to overwork and will drop its horsepower. Thus, it won’t provide a precise cut or whatever cut you want. The motor won’t function correctly and might not work at all eventually.
  • Before making a cut, you need a good balance when handling the equipment.
  • When you are using the equipment, you should lay the head flat and keep it that way all the time to prevent weed eater burn. Don’t push it down too far on the ground. If you’re tilting or using it in an angle, it will lead to weed eater burn. This causes the weeds to grow in different lengths or and different areas.
  • Always do the weed eating after mowing. So, that you can gauge your height to what you’re trimming. It will also prevent uneven edges.
  • Once you place the head on the ground flat, keep up with a steady motion from one side to another. Walk forward nicely and slowly. Keep the head flat at all times.
  • If there are any rocks on the lawn, set them all aside first. If you run your equipment over them, your nylon might break.
  • If you are cutting along the fence, you’ve got to be careful. You can go near it but not too close. There might be times that you may need to touch the fence to trim all the weeds off. But don’t drag it all the way to the fence. You might damage both the fence and your equipment.


Keeping your lawn regularly trimmed provides you a healthier space and environment. However, if you’re going to use a weed eater along the fence or near the building, there are safety measures you have to apply first to prevent damages on the establishment and to your equipment.

It seems dangerous to use a weed eater near the fence or the building, but actually, it isn’t. As long as you know how to use the weed eater properly and reinforce your fences and posts around the building with a better support and material, trimming those weeds won’t be a problem at all.

Best Lawn Grasses for Warm- and Cool-Seasons

Best Lawn Grasses for Cool and Warm Seasons

The best lawn grasses are shown and discussed here for your successful lawn. Your front lawn is usually filled with flowers, bushes, and trees. It has lots of curb appeal and people walking and driving by love to see it all year long. Your backyard is where the kids and dog romp and play, and you have lunch on the deck cooking on the grill. Changes in the lawn’s looks and needs do happen. Or a new lawn needs to be put in if you don’t use sod for a new house build.

Best Lawn Grasses

How to Kill and Eliminate Weeds from Your Lawn

How To Kill And Eliminate Weeds From Your Lawn

How to kill weeds and put a stop to them returning with less work and less chemical weed killers is discussed here. Weeds are hardy and as my dad used to say, “A weed is a wildflower that you don’t want in your lawn.” Wildflowers are beautiful on the prairies, the woods, forests, and deserts. With healthy grass, these unwanted nuisances will stop growing.

Weed Eater Lawn Mower Manuals, Care Guides, and Parts

Weed Eater Lawn Mower Manuals

The Weed Eater Lawn Mower is a lawn mower designed to trim shrubs, weeds, and grasses in hard to reach areas. It can be used also in cutting down some overgrown plants in the yard. If you have the right type of gardening and lawn tool, you will be able to trim the weed nicely and maintain the beauty of your garden.

Weed Eater Lawn Mower Manuals

Weed Eater Lawn Mower

A Weed Eater lawn mower is a weed whacker. It usually has a long streak of strings on one end and a handle on another. To cut the grass, there is a string that spins when powered on, usually by a gasoline. The basic weed eater commonly have the edger blades, air fillers, fuel filters, machine starter parts, throttle control, trimmer line, and electrical parts to function well. With proper operation, this machine makes the garden trimmed, but it takes also proper maintenance to prevent damage.


An electric powered one needs a cord plugged into the socket. This limits the areas to reach. This tool is also great only for lesser weeding tasks due to its limited cord and its voltage and capacity. It is best to use an extension cord, especially if you are reaching farther into the corners of your yards. The extension cord should also be picked the right way. It should be the one designed for outdoor purposes. When operated, the tool creates small noise and it is not irritating to the ears. What is good about this tool is the low-maintenance requirement.


The improvement of the battery-powered Weed Eaters is due to the modern technology. Because of the batteries, there is no need for cord and extension, thus allow you to reach far and handle it well. Air and noise pollution are also greatly reduced, only that it will require you to have extra batteries in case the batteries are drained already.


The gas or oil or gas and oil powered ones tend to cause air and noise pollution, but they are the most common ones to many gardeners and lawn mowing companies. The right brand of oil and gas should also be given proper consideration as it will affect the function and performance of the tool.

Weed Eater Manuals

Weed Eater Lawn Mower Manuals, Care Guides, and Literature Parts

The manuals are always included in the package. Before using the tool, it is recommended for users and owners to always read the manuals to know the benefits, limitations, advantages, and disadvantages of the tool. It may appear as a great gardening tool, but it has its specific uses and functions, and it may not be functional for other purposes.

Proper Care Guides

Using your Weed Eater lawn mower should be done with careful procedures. This will not only prolong the life and usefulness of the tool, but will also guarantee you of a productive result.

Basically, all types of Weed Eaters functions the same. They only differ in size, power source, and ranges. One can be electric powered, battery powered, or gas/oil powered. Depending on the power source, proper care guides may differ in some ways, but they all require the same care and maintenance to prevent the tool from being damaged. Proper use of this tool, whether you are using an electric, battery, or gas/oil powered one, is very important. The way you handle and use it will matter a lot to how long the tool will last.

For the user, proper precautionary measures should also be given consideration. Protective clothing like long pants, long sleeves shirts, shoes, and goggles are helpful.


Parts and spare parts of the Weed Eaters are available from the manufacturers and sellers. Most of the package may come with extra parts, while some parts of the tool can be availed directly from the manufacturer.

Common problems arise every now and then. If the manuals do not provide the needed solution, customer service representatives may give you the answer or help you operate the tool properly. Instructions are usually given in the manual for the proper handling, operating, and maintenance. There may be instructions as well for simple repairs or quick maintenance. The Weed Eater lawn mower is a great tool for landscaping and gardening, and it is best to handle it with care so that you will be able to maximize its function and purpose for a long period of time.